SNC45-HXP

Form-in-Place Gasket

Product Description

SNC45HXP is nickel/graphite filled heat cure silicone Form-InPlace grade, shows the lowest shore hardness in Laird’s cure FIP resulting in minimum required compression force when mounting assemblies. It shows very good shielding performance along with good compression set ending in overall long-term reliability.
RG 

Features and Benefits

  • Form-in-place gasketing offers a total cost savings in the form of reduced raw materials, labor or assembly time
  • Room temperature cure gasketing materials eliminate the need for costly heat curing systems, allowing the use of inexpensive plastic or metal substrates
  • Single-component compounds eliminate the need for mixing ingredients, thereby shortening production cycles and eliminating related waste
  • Easy to program operating system allows for quick part-to-part changeover, minimal tooling investment for new designs, and prototype development in 24 to 48 hours
  • High shielding effectiveness: >110(avg) dB up to 14 GHz

Capabilities

  1. Automated Packaging
  2. Custom Automation
  3. Custom Product Development
  4. Prototyping
  5. Service
  6. Testing

Datasheets

SNC45HXP Last updated05/14/24

Technical Specification

  • Typical Properties
    Color
    Gray
    Filler Type
    Nickel/Graphite
    Gasket Profile
    Triangular
    Operating Temperature Max (Celsius)
    125
    Operating Temperature Min (Celsius)
    -55
    Resin Type
    Silicone
    Shelf Life
    6 months
  • Electromagnetic Properties
    Shielding Effectiveness (dB)
    >110(avg.)
  • Electrical Properties
    Volume Resistivity
    <0.025 Ohm-cm
  • Mechanical Properties
    Compression Set
    <27
    Hardness
    47
  • Compliance
    UL Flammability Rating
    V0
Showing 1 (of 1) Parts
Reset
Part NumberPart Name
SNC45HXPForm in Place gasket