Cavity Resonance Absorbers
Silicone Elastomer Sheets
Cavity resonance occurs when a cavity becomes larger in dimension. Concern grows when shield /cavity dimensions are equal to or greater than a wavelength.
At low frequencies (large wavelength), resonance will occur when cavity dimensions are increasing in size. At high frequencies (small wavelength), it is difficult to using shielding that DOES NOT resonate.
When a cavity resonates, circuit operation inside the cavity can be compromised. There is severe decrease in shielding effectiveness.
Absorber material can dampen cavity resonance. While Laird’s magnetically loaded grades will perform as intended below 35 GHz, it s the dielectric grades which perform above 35 Ghz.
Cavity Resonance Absorbers Series
Eccosorb™ 5G Hi F1
The Laird™ Eccosorb™ 5G HiF 1 grade is a dielectrically loaded elastomer with excellent absorption properties in the high frequencies of the 5G mmWave range.
Eccosorb™ 5G MeF 1
The Laird™ Eccosorb™ 5G MeF 1 grade is a magnetically loaded silicone elastomer adressing the medium range 18 to 40 Ghz 5G range.
Eccosorb™ BSR
The Laird™ Eccosorb™ BSR / MFS product is a thin, flexible, high-loss, electrically non-conductive silicone absorber covering from 6 Ghz to 18 Ghz.
Eccosorb™ GDS
The Laird™ Eccosorb™ GDS grade is a thin, flexible, high-loss, magnetically loaded, electrically non-conductive silicone rubber sheet.
Eccosorb™ GDS FR
The Laird™ Eccosorb™ GDS FR grade is a UL94 V0 thin, flexible, high-loss, magnetically loaded, electrically non-conductive silicone rubber sheet.
Eccosorb™ JCS
The Laird™ Eccosorb™ JCS grade is an electrically conductive silicone absorber rubber sheet for cavity resonance as well as insertion loss application purpose.
Eccosorb™ JCS-Next
The Laird™ Eccosorb™ JCS-Next grade is a dielectrically loaded silicone rubber electromagnetic absorbing sheet, targeting high frequency noise above 30 GHz.
Eccosorb™ MCS
The Laird™ Eccosorb™ MCS elastomer is a thin, flexible, high-loss, electrically non-conductive silicone rubber sheet covering 800 Mhz up to above 6 Ghz.
Eccosorb™ MMI
The Laird™ Eccosorb™ MMI elastomer is a flexible absorber based on dielectric loss fillers covering from 35 Ghz to up above 100 Ghz.
Eccosorb™ RF-LW
Eccosorb™ RF-LW is an elastomeric absorber with high permeability & permittivity that is recommended for frequencies ranging from .8 GHz to 6 Ghz.